If your TV is stuck on the logo or the screen is blank, use this "forced" update method: Turn off the TV and unplug the power cord. Insert the USB drive into the port.
: After a successful update, it is highly recommended to perform a factory reset from the Settings or Service Menu to ensure all new features are correctly initialized.
: Use a USB stick formatted to FAT32 . Copy the extracted firmware file directly to the root of the USB drive—do not place it inside any folders. Step 2: Install via USB (Manual Method)
: Only install firmware specifically for the 55UIB model. Installing the wrong software can permanently damage (brick) your TV's motherboard.
Updating the software on your ONIDA 55UIB LED TV can resolve performance issues, fix remote controller crashes, and optimize playback. Since these files are often large, they are frequently split into multiple parts, such as a file, which must be combined and extracted before installation. Step 1: Download and Prepare the Software
If your TV is functional and connected to the internet, you can check for official OTA (Over-the-Air) updates: Navigate to > Device Preferences > About . Select System Update and then Check for Update . If an update is found, select Download and Install . Important Troubleshooting Tips
To ensure a successful update, you must gather all parts of the firmware (e.g., part01 through part08) into a single folder on your PC.
Continue holding until the front LED begins to blink or an "Updating" progress bar appears on the screen.
