For more detailed technical specifications, you can refer to the Nano-10 User Manual or the Quick Start Guide provided by the manufacturer. Are you trying to connect the
Your PC’s IP address must be in the same range (e.g., 192.168.1.10 ) for the initial setup. If your router uses 192.168.0.x , you must temporarily change your PC's IP to the .1.x range to access the PLC's configuration page and update its address. 3. Basic Programming (i-TRiLOGI) Once the software is running and the hardware is connected:
, you must establish a connection between your computer and the Connect the to your router or PC using a standard CAT5/CAT6 cable. Default IP Address: The defaults to 192.168.1.5 .
The file is typically associated with the Nano-10 Programmable Logic Controller (PLC) from Triangle Research International (TRi). This compact controller is used in industrial automation for tasks like remote monitoring and web-based control.
Use the software’s drag-and-drop interface to create ladder diagrams.
Below is a guide for extracting and setting up the software typically found within this archive. 1. Extraction and Software Installation
For more detailed technical specifications, you can refer to the Nano-10 User Manual or the Quick Start Guide provided by the manufacturer. Are you trying to connect the
Your PC’s IP address must be in the same range (e.g., 192.168.1.10 ) for the initial setup. If your router uses 192.168.0.x , you must temporarily change your PC's IP to the .1.x range to access the PLC's configuration page and update its address. 3. Basic Programming (i-TRiLOGI) Once the software is running and the hardware is connected: nano10.rar
, you must establish a connection between your computer and the Connect the to your router or PC using a standard CAT5/CAT6 cable. Default IP Address: The defaults to 192.168.1.5 . For more detailed technical specifications, you can refer
The file is typically associated with the Nano-10 Programmable Logic Controller (PLC) from Triangle Research International (TRi). This compact controller is used in industrial automation for tasks like remote monitoring and web-based control. The file is typically associated with the Nano-10
Use the software’s drag-and-drop interface to create ladder diagrams.
Below is a guide for extracting and setting up the software typically found within this archive. 1. Extraction and Software Installation