Confirm pedal is released. Turn ignition ON (wait 3 seconds). Fully depress and release pedal 5 times within 5 seconds.
Wait 7 seconds. Fully depress pedal for ~20 seconds until the stops blinking and stays ON. Nissan Qashqai 2010 1.46 Adaptation
If you are performing maintenance on a 2010 Qashqai (J10), you must perform these "Learning" steps to ensure a stable idle and proper fuel management. 1. Accelerator Pedal Released Position Learning Confirm pedal is released
The 2010 "refreshed" Qashqai introduced several mechanical and software updates aimed at refinement. Specification 1.6L Petrol (117bhp), 1.5L dCi (110bhp), 2.0L Petrol/Diesel Transmission Wait 7 seconds
5/6-speed Manual or CVT (Continuously Variable Transmission) Pure Drive variant reduced to 129g/km CO2 Common Issues
Ensures the ECM knows the exact "stop" point of the throttle butterfly. Turn ignition ON. Action: Turn ignition OFF and wait at least 10 seconds.
CVT jerking, timing chain stretch, and faulty window regulators ⚠️ Important Maintenance Note